what is the waste tyre to diesel distillation machine

Production nitroduction of DOING waste tyre to diesel distillation machine
 
DOING waste tyre to diesel distillation machine is specially made mainly as the auxiliary equipment of our waste tyre/plastic pyrolysis plant. It can refine tyre fuel oil and plastic fuel oil got from the pyrolysis plant into diesel oil.
However, Except tyre oil and plastic oil, this oil distillation machine can also refine waste motor/engine oil into diesel. This diesel oil can be used for boilers, trucks, generators, and low speed engine like digging machine/road roller/loading machine and so on.The normal processing capacity for our distillation machine includes 3T/D, 5T/D ,10T/D and 20T/D.
Feedstock& product of DOING waste tyre diesel distillation machine
The feedstock can be tyre pyrolysis oil, plastic pyrolysis oil, waste engine oil, etc, the final product will be diesel oil.

Working process of DOING waste tyre to diesel distillation machine 

1.    Put tyre oil/plastic oil/engine oil into distillation reactor with oil pump
2.    Heating system works to heat waste oil over 170℃
3.    Distillation oil gas produced and cooling down to pure distillation oil by condensers
4.     After distillation, the distillation oil is pumped into odor-removal tank where catalysts used to remove the smell
5.     Then oil go into color-removal tank for de-coloring with the special catalysts
6.     Finally, you can get about 85% pure diesel oil.

 
New tech DOING waste tyre to diesel distillation machine is always known for its high working efficiency, high oil output and high oil quality since its first day appearing in the market.
Why DOING waste tyre to diesel distillation machine is the new tech? That is because DOING waste tyre to diesel distillation machine has the revolutionary changes on the design of distillation reactor and the heating method. New Tech DOING waste tyre to diesel distillation machine adopts vertical design distillation reactor and indirect heating by heating oil boiler, rather than the traditional horizontal design distillation reactor heated with open fire. The temperature of heating oil can reach 400℃,the distillation process can be finished very fast with the heat from the heating oil, meanwhile indirect heating can greatly prolong the reactor life. The traditional waste tyre to diesel distillation machine heated directly by open fire, and it will take very long time to finish the distillation process and since it uses open fire heating, the reactor body will have short life time, besides, the distillation reactor is horizontal design,  it is not easy to do the residue slagging. Anyway , DOING New Tech waste tyre to diesel distillation machine has many obvious advantages over the traditional one.


Contact:Ms Bonnie
Phone: +86-371-5677 1821
Fax:86-0371-86222525
TEL:+86 158 9380 0169
Email:market@doinggroup.com
Email:oilmachine@doinggroup.com
Skype: bonniezhao2
www.continuouspyrolysisplant.com
www.wastetireoil.com

Comments