Waste tyre pyrolysis plant project report


 With auto industry growing strongly, 50%-55% raw rubber are used for tire manufacturing every year. Auto should change tires every 30,000-50,000 km, in this way, 17 million tons waste tires produced in one year.
Waste tyre/plastic/rubber is refractory and needs hundreds of years before not affecting plants growth in the earth.It takes up quantities offarmland, breeding some diseases (dengue fever etc), destroys vegetation. If used for fuel or burned, no plants will grow in surrounding field. Thus to figure out an efficient and environmental way to dispose the waste tyres is such important for the green world.


Doing group produced waste tyre  pyrolysis plant with lower cost and higher fuel oil output can convert waste tyre to fuel oil ,carbon black and steel wire
What is pyrolysis:

Pyro = heat. Lysis = break down.

Pyrolysis is chemical reaction. This reaction involves molecular breakdown of larger molecules into smaller molecules in presence of heat. Pyrolysis is also known as thermal cracking, cracking, thermolysis, depolymerization, etc.
The Working Process Of waste tyre Pyrolysis Plant:


1 Put the raw material into the furnace;

2.Seal the feed inlet then the bottom of the reactor will slowly heat the wastes by coal or electricity ;

3. When the temperature reaches the degree of 250 to 280, we will get the crude oil ;

4. The oil steam will be continuous produced until the temperature reaches 300-400°C ;

5. Oil steam will flow through light and heavy components separating device ;

6.  Light component will enter the condenser and meanwhile the residues will be discharged automatically in succession;

7. Liquefied part will be condensed to rubber oil;

8. The part that cannot be liquefied will be input into heating supply system for burning by way of combustion gas purification system.
Final product application of waste tyre pyrolysis plant

1. Fuel oil (45%-50%): Oil from  tyre pyrolysis plant can be used as industrial fuel for burning.
2. Carbon black (30%): First, Carbon black from waste tyre pyrolysis plant is crude. You can sell it to the brick factory as internal combustion or to the factory which need it as raw materials, such as shoe, tire, cable and sealant companies. Second, could make further process, make carbon black powder into carbon black briquette, and use it for burning.
3. Steel wire (10-15%): It can be sold to the iron and steel company directly.
4. Waste gas (5%): we have a special design could recycling it into fire furnace for burning.
 Contact: Ms Bonnie
Phone: +86-371-5677 1821
       +86 15893800169
Skype: bonniezhao2
Email: oilmachine@doinggroup.com
www.wastetireoil.com
www.doinggroup.com
www.continuouspyrolysisplant.com


Comments