Doing group produced waste waste tire recycling pyrolysis plant with lower cost and higher fuel oil output can convert waste tire to fuel oil ,carbon black and steel wire.
How to work a tire recycling pyrolysis plant?
Waste tire recycling pyrolysis plant working process
1.Feed raw materials
The raw material can be waste tire/waste plastic/waste rubber. Always feed by the auto feeder.
2.Pyrolysis
Include a reactor and catalyst room. Heat the reactor by coal/wood/oil/natural gas. This part will produce high temperature oil gas, the oil gas then flow into the next system.
3. Condensing
Oil gas come out from the reactor and catalyst chamber then cooling down in this part. Condensing system include condenser pipe, oil water separator, horizontal condenser and waste gas condenser. This will make the oil yield to the maximum.
4.Waste gas recovery
This part mainly deal with the gas that cannot be condensed. The whole process is very steady and high efficiency.
5. Discharge
After finished oil produce, the temperature of reactor can be cooled down, When the temperature falls down to 40 degree then carbon black can be discharged automatically by the way of anticlockwise rotate the reactor. The carbon black will drop into slag pool and then use screw conveyor to clean the slag pool. After discharging the carbon black, we can discharge the steel wire. There is steel wire hook in the auto-feeder, we only need put the steel wire hook into the reactor, and start the motor, the steel wire can be pulled out easily, there is no need for workers to contact the reactor, it is very convenient.
Contact: Ms Bonnie
Phone: +86-371-5677 1821
+86 15893800169
Skype: bonniezhao2
Email: oilmachine@doinggroup.com
www.wastetireoil.com
www.doinggroup.com
Comments
Post a Comment