It’s well known that the conversion of waste plastic into fuel oil process can be also called pyrolysis process. So we need a complete set of pyrolysis equipment to implement this process. The followings are batch operation process :
Conversion waste plastic into fuel oil working process
First of all, put the waste plastics into the pyrolysis reactor.
Secondly, heat the reactor by burning the fuel materials such as coal, or wood, or natural gas, oil. The reactor will be slowly heated, when the temperature reaches around 250 degrees, the oil gas will be generated.
Thirdly, oil gas will be processed by our technology and then goes to cooling system to be liquid oil. The gas which can not be liquefied under normal pressure will go back to combustion system. It will replace the fuel material to burn the reactor, which is energy saving and environment friendly.
Fourthly, after finishing oil production, the temperature of reactor will be down. When the temperature falls down to 40 degrees, the carbon black can be discharged automatically.
Lastly, the hot smoke produced from the reactor can achieve national emission standard after being processed by the advanced dedusting system.
Contact: Ms Bonnie
Phone: +86-371-5677 1821
+86 15893800169
Skype: bonniezhao2
Email: oilmachine@doinggroup.com
www.wastetireoil.com
www.doinggroup.com
Comments
Post a Comment