The development of the society provides a good environment for the car industry, and the tyre industry also benefits a lot. Usually the raw material of the tyre is natural rubber, which has a long service life and a strong wear resistance. At the same time, it is also a problem to deal with the waste tyre.
Henan Doing produced tyre to oil process pyrolysis plant can convert waste tyre to fuel oil ,carbon black and steel wire.
Then ,how to make furnace oil from tyres?
1. The waste tyre is cut into the small piece, then put those into reactor by full-automatic feeding machine(for the continuous machine). The reactor is supposed to be left 1/3 space for rotating more smoothly. Then make sure the door of feeding machine is closed.
2. The reactor will be gently heated by burning the fuel material (coal, wood, natural gas, LPG or tire oil generated from last batch). The oil gas will be released when the temperature reached 100℃ (250-280℃is the top output rate interval). Heavy oil gas separated by manifold is supposed to be liquefied and drop down into the heavy oil tank. The lighter gas will rise up to the oil condensers, be liquefied in to oil and stored in the oil tank. The incondensable gas though desulphurization and dedust by hydroseal will be led to the furnace for recycling.
3. After all the above work has been done, the reactor should be cool down. Carbon black will be discharged automatically. There possibly will be a little exhaust gas left, please must expel it after reaching emission standard.
4. Before starting next batch, make sure all the work has been done.
Contact: Ms Bonnie
Phone: +86-371-5677 1821
+86 15893800169
Skype: bonniezhao2
Email: oilmachine@doinggroup.com
www.wastetireoil.com
www.doinggroup.com
Comments
Post a Comment