The waste oil to diesel plant can be used for recycling all kinds of waste oil, such as crude oil, plastic pyrolysis oil, tyre pyrolysis oil, used engine oil, etc. They can be converted into qualified diesel fuel by distillation technology. And the diesel fuel can be directly used in low speed engines and generators.
1. Pump raw material into distillation reactor by oil pump. Then close the feeding inlet to totally sealed. (Continuous plant adopts automatic feeding device);
Waste oil to diesel plant process waste oil to diesel
Waste oil to diesel plant process waste oil to diesel
2. Use coal/wood/natural gas/fuel oil/electricity to heat the reactor, and the liquid oil will slowly become oil gas, which will be liquefied into fuel oil by the cooling pipe and condensers and then go into oil tank. For getting higher quality diesel, you are required to control the temperature over 150 Celsius degrees. When the temperature decreases to below 150 Celsius degrees, the gasoline will be cooled out;
3. Some gases like Methane, Ethane, Propane, Butane cannot be liquefied will be recycled into the furnace for heating the reactor;
4. It will produce some smoke when fuel materials are burnt. The smoke will be processed by dedusting system completely;
5. The exhaust gas will go into the chimney sucked by draft fan, before emission the exhaust gas will become steam, no pollution.
Contact: Ms Bonnie
Phone: +86-371-5677 1821
Mobile/Wechat/Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@doinggroup.com
http://www.wastetireoil.com
http://www.doinggroup.com
Comments
Post a Comment