Tyre to oil recycling process ?

 Tyre to oil recycling process pyrolysis plant
Tyre to oil recycling process can not only solve the pollution problem, but can also create new energy. If half of the tyre waste can be fully recycled, then we can get 17500 tons fuel oil, whose value is 10 billion 500 million yuan. So tyre to oil recycling process plant  is beneficial to both the environment and the society.

Tyre to oil recycling process ?

 Tyre to oil recycling process pyrolysis plant process waste tyre to fuel oil
1. Feed raw material (waste tire、plastic) into reactor by full-automatic feeding machine. The reactor is supposed to be left 1/3 space for rotating more smoothly. Then make sure the door of feeding machine is closed.

2.Pyrolysis process: reactor will be gently heated by burning the fuel material (coal, wood, natural gas, LPG or tire oil generated from last batch). The oil gas will be released when the temperature reached 100℃(250-280℃ is the top output rate interval). Heavy oil gas separated by manifold is supposed to be liquefied and drop down into the heavy oil tank. The lighter gas will rise up to the oil condensers, be liquefied in to oil and stored in the oil tank. The incondensable gas though dusulphurization and dedust by hydroseal will be led to the furnace for recycling.

3..After all fuel oil is produced, the reactor should be cool down. Carbon black will be discharged automatically when the temperature falls down 40 degree. If the raw material is the whole tire, please take out steel wire form the reactor by hooks below 50 Celsius at least.

4.There possibly will be a little exhaust gas left, please must expel it after reaching emission standard.
 5. Before starting next batch, make sure all the work has been done

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Mobile/Wechat/Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@doinggroup.com
http://www.wastetireoil.com
http://www.china-doing.com