Tyre to oil recycling process plant is a recycling technique that converting plastic or tiy waste into industrial fuels like pyrolysis oil, monomers, or other valuable materials by thermal and catalytic cracking processes like carbon black, steel wire and hydrocarbon gas. It allows the treatment of mixed, unwashed plastic wastes.
Tyre to oil recycling process ?
Tyre to oil recycling process working process
1. Use auto-feeder to feed the waste tyres into reactor automatically, seal the feeding inlet door tightly.
2. Heat the reactor by burning the following fuel material: coal, wood, natural gas, or fuel oil in the combustion system. The reactor will be heated slowly, when the temperature reaches around 250 degree Celsius, the oil gas will be formed.
3. After processed by tyre to oil recycling process machine, the oil gas will go to the cooling system to be liquefied. The gas which cannot be liquefied under normal pressure will be designed to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy.
4. After finishing oil collecting, the temperature of reactor will be down, while, carbon black can be discharged automatically at the same time.
5. When the temperature falls down to 100 degree Celsius, workers can open the door of reactor to discharge the steel wire.
6. Start another batch working.
Contact: Ms Bonnie
Phone: +86-371-5677 1821
Mobile/Wechat/Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oiilmachine@doinggroup.com
http://www.wastetireoil.com
Comments
Post a Comment