DOING ECO DY-Q-2.5 Plastic to Diesel and Gasoline Separation Machine on Trial in Indonesia

 A new plastic-to-fuel project is progressing in Bandung, Indonesia. DOING ECO's DY-Q-2.5 fully continuous plastic pyrolysis and gasoline-diesel separation machine has entered installation and trial operation at a local automotive parts manufacturing facility.

Unlike conventional batch-type plastic pyrolysis systems, this project uses a continuous processing design with an additional separation stage to produce gasoline-range and diesel-range fractions.

Project Overview

The customer is an automotive parts manufacturer in Bandung, Indonesia. Its production process requires clean and consistent gasoline and diesel for oil coating vehicle components during storage and transportation.

The customer was looking for a compact plastic-to-fuel solution that could provide more consistent products than the batch-type systems it had previously evaluated.

Project Details

Item

Details

Client

Automotive parts manufacturer in Indonesia

Machine

DY-Q-2.5 fully continuous plastic to diesel and gasoline separation machine

Signed

June 2026

Shipped

July 2026, by sea

Application

Gasoline and diesel for oil coating protection of vehicle parts

Status

Installation and trial run, September 2026

Insert the original equipment installation photo here

Why Did the Customer Choose a Continuous Separation System?

The customer had already seen several batch-type plastic pyrolysis plants operating in Indonesia but was not satisfied with their output.

A conventional batch pyrolysis plant generally produces mixed pyrolysis oil. It does not directly provide separate gasoline and diesel fractions, and the oil quality may vary between production batches.

For this automotive parts manufacturer, that was an important issue. Gasoline and diesel have different evaporation speeds, residues and odors, which can affect the oil coating results.

The customer therefore needed a system capable of producing two separate fuel fractions with more consistent characteristics.

DOING ECO's DY-Q-2.5 was designed around this requirement, combining continuous plastic pyrolysis with catalytic cracking and fractionation.

How Does the DY-Q-2.5 Processing System Work?

The system integrates plastic feeding, continuous pyrolysis, catalytic cracking, fractionation and condensation into one processing line.

1. Continuous Plastic Feeding and Pyrolysis

Shredded plastic is delivered into the reactor through a sealed screw conveyor. Inside the reactor, the material is heated in an oxygen-limited environment, breaking down its polymer chains into smaller hydrocarbon molecules.

The reactor keeps operating continuously, without the cooling and reheating intervals required by batch production.

Carbon black is discharged through a water-cooled screw conveyor, allowing the production process to continue.

2. Catalytic Cracking and Fractionation

The generated pyrolysis vapors pass through a catalytic cracking tower before entering the fractionating column.

The column separates lighter and heavier hydrocarbon fractions, allowing gasoline-range and diesel-range products to be recovered separately.

3. Condensation and Product Recovery

The separated vapors pass through shell-and-tube condensers, where they are cooled and recovered as liquid products.

The final separation process is configured to meet the customer's requirements for gasoline and diesel used in vehicle component coating.

Insert the original installation-site photo here

Automated Control for Continuous Operation

The DY-Q-2.5 is equipped with a programmable logic controller (PLC) and multiple monitoring components, including thermocouples, pressure transducers and automated valves.

These components help manage key operating processes:

  • Plastic feeding and material discharge

  • Reactor temperature monitoring

  • Pressure monitoring

  • Automated process control

  • Safety interlocks

With these systems working together, a relatively small operating team can manage the continuous production process.

On-Site Installation and Operator Training

DOING ECO provides installation and commissioning support for the project.

After the equipment arrived in Indonesia, DOING ECO engineers went to the customer's factory to guide equipment positioning according to the layout drawing, connect pipelines and wiring, calibrate burners and commission the different systems.

The shipment also included specialized assembly tools, spare gaskets and replacement seals.

During operator training, the customer's team learned how to manage the feeding rate, adjust operating temperatures and perform routine preventive maintenance.

Insert the original equipment installation photo here

Current Project Status

The project entered trial feeding and operator training in September 2026.

During this stage, the customer's operators are learning to operate the control panel under the supervision of DOING ECO engineers. The engineers also adjust operating parameters according to the system readings.

Final handover will take place once the gasoline and diesel separation remains stable across consecutive production runs.

Frequently Asked Questions

1. Does the machine need external fuel during normal operation?

During normal operation, non-condensable gas generated by the pyrolysis process passes through a water seal and returns to the burners. External fuel is mainly needed during startup.

2. Why did the customer choose a 2.5-ton-per-day capacity?

The customer needed a compact system that could cover its coating fuel requirements while fitting inside its existing factory.

3. Can the carbon black produced during pyrolysis be collected?

Yes. Carbon black is discharged continuously as a dry powder through a water-cooled screw conveyor and can be collected for further utilization.

4. What makes this system different from a conventional batch plastic pyrolysis plant?

The DY-Q-2.5 integrates continuous feeding and discharge with catalytic cracking and fractionation. Instead of producing only mixed pyrolysis oil, it is designed to separate gasoline-range and diesel-range fractions.

Looking for a Plastic-to-Fuel Solution?

Different plastic feedstocks, processing capacities and final product requirements may require different system configurations.

If you are planning a plastic-to-fuel project, contact DOING ECO to discuss your raw materials, daily processing capacity and desired products.

Website: https://www.continuouspyrolysisplant.com/

Comments